Non-Displayed Machine Operation Faults
Faults not displayed on the HMI.
Infeed
Printing
Misc
Faulty Bags
Sealing
- Vertical Seal Moves in the Vertical Seal Area or Forms Wrinkles
- Vertical Seal is Not in the Center of the Bag
- Vertical Seal is Bowed
- Vertical Seal Shrinks
- Some of the Vertical Seal is Not Closed
- Faults Forming the Vertical Seal
- Vertical Seal or Hot Air Welding Temperature is Too Low
- Unsatisfactory Bag Seam Resistance
- Product Caught in the Cross Seal.
- The Product Shrinks or Sticks to the Cross Seals
- Faults Forming the Cross Seam
- Packaging Material Tears Slightly in the Seam Transition
- Holding Time is Too Short
- Seam Profile Has Differing Strengths (Only for Hot Sealing)
- Packaging Material with Insufficient Hot Tack
- Compressed Air May Press on the Bottom Seam When the Cross Jaws Close
- The Piercing Knife Does Not Cut the Packaging Material Cleanly
- Product Parts in the Top Seal
- Product Parts in Both Seals
- Product Contains Suspended Matter and Dust
- Product Parts in the Bottom Seal